hardMVS:

Product Review: Jamma Harnesses

There are a few different Jamma harnesses available, some are better than others.

	This is a basic Jamma harness from Happ. I bought one and returned it for a couple of reasons; 1) The power wires were not 18 gauge. 2) It was missing all the optional wires 3) It was not labled.
	Happ also makes a "Deluxe" harness with Molex connectors and quick connects already on the harness. I sent this one back too. It did have 18 gauge power wires which was good, but was still missing some optional wires, but not as many as the basic.
	...however, some of the optional wires are only about 6" long. Real helpful...
	and unfortunately, the Molex connection only houses 9 connectors, not enough for MVS.
	This is a basic Jamma harness from Bob Roberts. It has all the optional wiring, and the power wires are 18 gauge. Get this one hands down. Add the connectors you need, and use my labels on the Download page to replace these if you are using it as a MVS harness.